中文
Pro-GT

  • Trolley Operator Pro GT

The PRO-GT is designed for use on commercial/industrial sectional overhead doors with standard lift tracks. Commercial/industrial continuous duty worm gear trolley operator * UL325 (2010) compliant When ordering a PRO-GT operator, supply us with the following information:
  • Door height
  • Door width
  • Horsepower
  • Voltage/Phase
  • Safety Devices
  • Options
Dimensions Trolley Operator Pro GT Dimensions

    • 2 year Warranty
    • 3 Control Circuit Options Available: 1- (M) Heavy duty reversing contactor with mechanical & electrical interlock incorporating the New UL325 (2010) Interface Module. *C2 factory wiring standard (constant pressure close), B2 wiring can be field set by moving 1 jumper and Installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge 2- (E) Full Function Sman 10.0 Logic control board featuring on-board receiver with antenna, enhanced program selections to include B2, C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge *D1 factory pre-set mode of operation standard (constant pressure open & close) 3- Heavy duty reversing contactor with mechanical & electrical interlock. (Not available in US or other areas where UL325 (20l0) is mandated) C2 factory wiring standard, B2 wiring can be field set by moving 1 Jumper. Provisions for standard reversing devices.
    • 24V class 2 control circuit with 40VA transformer to protect against short circuit
    • External radio control terminal strip
    • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly
    • Three button open-close-stop control station Nema·l
    • Continuous duty industrial motor with external reset overload protection (single phase)or external thermal overload relay protection (3 phase)
    • Heavy duty worm gear reduction in oil bath gearbox
    • Motor removable without affecting limit settings
    • Adjustable in-line friction clutch
    • Solenoid brake standard
    • 1" permanently lubricated & sealed ball bearings on final drive shaft
    • Emergency quick release disconnect for manual operation
    • #41 roller chain drive on trolley rail assembly
    • Trolley track for doors up to 12' standard
    • Door speed 10" per second
    • Baked on dark grey coat finish
    • Shipping weight 120 Ibs (excludes rails)
    NEW SMART 10.0 LOGIC BOARD Trolley-Operator-Pro-GT-Logic-Board
    • On-board open, close, stop push buttons.
    • Built-in 372 Mhz radio receiver
    • Programable timer to close
    • Programable mid stop
    • Maximum run timer
    • 1.5 sec time delay reverse
    • Programable delay on close
    • On-board fuse protection
    • Plug in board option
    • New vision lights

    Features

    • 2 year Warranty
    • 3 Control Circuit Options Available: 1- (M) Heavy duty reversing contactor with mechanical & electrical interlock incorporating the New UL325 (2010) Interface Module. *C2 factory wiring standard (constant pressure close), B2 wiring can be field set by moving 1 jumper and Installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge 2- (E) Full Function Sman 10.0 Logic control board featuring on-board receiver with antenna, enhanced program selections to include B2, C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge *D1 factory pre-set mode of operation standard (constant pressure open & close) 3- Heavy duty reversing contactor with mechanical & electrical interlock. (Not available in US or other areas where UL325 (20l0) is mandated) C2 factory wiring standard, B2 wiring can be field set by moving 1 Jumper. Provisions for standard reversing devices.
    • 24V class 2 control circuit with 40VA transformer to protect against short circuit
    • External radio control terminal strip
    • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly
    • Three button open-close-stop control station Nema·l
    • Continuous duty industrial motor with external reset overload protection (single phase)or external thermal overload relay protection (3 phase)
    • Heavy duty worm gear reduction in oil bath gearbox
    • Motor removable without affecting limit settings
    • Adjustable in-line friction clutch
    • Solenoid brake standard
    • 1" permanently lubricated & sealed ball bearings on final drive shaft
    • Emergency quick release disconnect for manual operation
    • #41 roller chain drive on trolley rail assembly
    • Trolley track for doors up to 12' standard
    • Door speed 10" per second
    • Baked on dark grey coat finish
    • Shipping weight 120 Ibs (excludes rails)

    Logic Board

    NEW SMART 10.0 LOGIC BOARD Trolley-Operator-Pro-GT-Logic-Board
    • On-board open, close, stop push buttons.
    • Built-in 372 Mhz radio receiver
    • Programable timer to close
    • Programable mid stop
    • Maximum run timer
    • 1.5 sec time delay reverse
    • Programable delay on close
    • On-board fuse protection
    • Plug in board option
    • New vision lights


需要了解更多信息吗?

请填写以下表格,免费获取报价或产品相关信息。我们会尽快与您联系。
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
中文